Produce Your Own Electricity
Solar energy is a great way to reduce electricity bills by using a constant source of constant current, the sun. Solar panels are expensive to buy, so it is sometimes easier to do at home. Building solar panels are not easy, so make sure you have the right equipment and tools for the job.
Solar cells are usually made of silicon, but you can also do the cuprous oxide. This compound is one of the raw material, which was found the photoelectric effect, causing electricity flow of materials. When you build solar panels, you will need a number of different ingredients in this work, such as copper, lead clips, micro-ammeter, and metal shears. These elements can be found at any hardware store. Some of the things needed at home, as well as the construction of solar panels, such as tap water, stove, table salt and sand paper.
Start by cutting the copper plate with the shears. Wash your hands before you dispose of grease or oil. You must wash the copper with a cleanser to remove dirt. With sandpaper, rub the paper carefully to remove all traces of corrosion or the accumulation of sulfur. Place the clean dry copper electric cooker and put the most heat. As the metal warms up, you should see the shadows beautiful rainbow forms on the metal. Red, purple, orange and habits begin to cover the surface.
When the copper starts to heat, the color disappears and a black copper oxide replaces. He burned the layer will eventually flake off, however, to expose the colors underneath. When the burner starts to become red hot, the entire sheet of copper covered with a thick black layer. Let metal boiling for half an hour, when a thick layer will be able to peel off easily. Remove the plate and let cool to room temperature before trying to rub the black layer. Easily scrub metal until the entire black color is removed. Cut another sheet of copper and bend the two pieces in a plastic pot, but to prevent them from touching each other. Copper cooked should be associated to the terminal, the alligator negative, while the new must have the positive terminal.
Mix hot tap water and table salt in a plastic container. Put the mixture in the sun, and you should see a moderate range of micro-amperes in the current drive. Copper is a semiconductor, so you actually have a solar panel is working from scratch. Looking for the best way to generate your own power?
Be sure to visit my website Solar Rebates In South Australia for more information about converting to solar energy and solar DIY projects.